Metal Bed
Product Information & Assembly Instruction
Features
Long lasting base frames
Our beds come with a base frame as standard which is designed for a long life and are meticulously tested to British Standards. Find out more about our bed frames.
High quality materials
Our beds are made of thick gauge steel tubing which are welded and casted into place using traditional techniques. All our material is chosen so that they ensure our beds last a long time and we thoroughly inspect all material that before we use them in our products. Any brass that we use is genuine solid brass castings and pipes rather than steel coated to look like brass.
Wooden sprung slat system
Our base frames come with sprung wooden slats which are 20% thicker than slats provided by other manufacturers. The gap between slats is 65mm and compatible with most mattresses available on the market.
Two height settings available
This bed frame comes with two standard frame height configurations, 14" and 17". You can choose the height setting at which you set the bed at the time of assembly. You may change the height setting at a later date if you choose to
Finish
All our iron beds are painted in a durable powder coated finish that has been tried and tested over the years.
| S.No | Parts Check List | Qty |
| 01. | Headend | 1 |
| 02. | Footend | 1 |
| 03. | Head end extensions legs | 2 |
| 04. | Side rails | 2 |
| 05. | Center cross bar (not for 3' bed) | 1 |
| 06. | End cross bar | 2 |
| 07. | Central rail | 1 |
| 08. | Slats (15 for the 3' bed) | 30 |
| Fittings Check List | ||
| 09. | Bolt M8*30 (pre fitted in headend & footend) | 8 |
| 10. | Washer (pre fitted in headend & footend) | 8 |
| 11. | Bolt M8*30 (pre fitted in end cross bar) | 4 |
| 12. | Bolt M8*30 (pre fitted in center cross bar) | 4 |
| 13. | Nut | 3 |
| 14. | CS Screw (75mm) | 3 |
| 15. | Allen Key | 1 |
| 16. | Spanner | 1 |
Fitting of Top Rail, Knobs & Collars if applicable
| S.No | Parts Check list | Qty |
| 1. | Brass, Chrome or painted top rail | 2 |
| 2. | Collars | 4 |
| 3. | Knobs | 4 |
| Fitting Check List | ||
| 4. | 3/8" mm Threaded stud | 4 |
| 5. | 6mm Threaded stud 715mm for headend | 1 |
| 6. | Allen key | 1 |
Fitting of Knobs if applicable
| S.No | Parts check list | Qty |
| 1. | Knobs | 4 |
| Fitting check list | ||
| 2. | 3/8" mm Threaded stud | 4 |
Assembly Guide Of Metal Bed
1. Fit the extension legs to the ends of the headend 01 as shown
2. Remove the bolts from the 2 side rails (04), 2 end cross bar (06) and center cross bar (05). Lay out the pipes as shown. using the removed bolts screw into place., Don not tighten at this stage
3. This stage may require two people. Remove the screws and washers from the headend (01) and footend (02). Then, using these fittings, attach the frame to the headend at your choice of the two height positions
4. Similarly attach the foootend
5. Fit the center rail (07) with CS screw (16) and nut (15) to center of one side rail (04). Repeat for the other end of center cross bar. Align the center cross bar (05) over center rail (07) and t with S Screw (16) and nut (15). Now tighten all the bolts.
6. Now drop the slats into the slat holders.
Assembly Guide Of Top Rails, Knobs & Collars
1. Fit stud (04) into threads provided in the legs.
2. Next fit brass tube into holes in the collar and lower into legs of the frame, making sure that the stud is passing through the center of the tube.
3. Tilt the headboard or foot board and using 6mm threaded stud attach the top rail to the end. Tighten
4. Finally screw both the knobs and center ball onto the stud.
Assembly Guide Of Knobs
1. Screw knobs to top of headend and footend
FAQs
1. What makes our iron beds & metal bed frames special
Iron beds are mostly valued for their durability, stylish elegance, cost effective features and versatility. Their ever lasting design means you can pass one down from generation to generation. Cast and wrought iron bed frames were introduced at the end of the 19th century, in the Victorian age. Vintage iron bed frames were handmade from pouring the iron and polishing detailed castings to the last finishing touches. The Bed manufacturer has been working with these traditional techniques for the last 20 years. Till today they produce beautifully handcrafted metal bed frames. Each of the beds is hand cast with attention to every little detail.
2. Are metal beds durable
Iron beds are more portable than other types of bed frames. For people who tend to move often metal beds survive moves better than wooden or upholstered beds. Metal which has been painted with our durable finish is able to withstand more punishment than wood and won’t rip like upholstery. Dismantling and assembling our metal bed will, also, not compromise their life in any way.
3. How do i take care of my metal bed frames
Maintenance of an iron bedstead is relatively easy, it should be kept clean and as
dry as possible. A dry cloth can be used to wipe down the frame every so often
to keep it dust free. An iron bed frame will not stain easily and any spills can be
easily cleaned with a damp cloth followed by a dry cloth. Tightening the bolts
yearly also makes sure it never squeaks.
4. Iron and brass beds finish
Our iron bed frames are painted in a durable powder coated finish that is
designed to withstand the daily rigours of life. Some also mix the painted iron with
brass finials, the contrast each metal brings lifting the overall look of the bed. All
our brass is hand casted which is then antiqued and then lacquered with a
durable protective coating. These brass parts can be usually replaced for either a
chromed finish or a painted finish as well.
Most Viewed Articles
Catalog
Bedding Catalog 2025 Furniture Catalog 2025Leather Headboard
Product Information & Assembly Instruction Features Our leather headboard collection is lavishly upholstered in top grain leather. Premium Leather Upholstery Crafted from high-quality leather for a luxurious look and feel, offering durability and ...Metal Bed
Product Information & Assembly Instruction Features Long lasting base frames Our beds come with a base frame as standard which is designed for a long life and are meticulously tested to British Standards. Find out more about our bed frames. High ...Privacy Policy
Introduction This privacy policy provides information regarding the use of our website by you, and describes the manner in which information is used by Orchids America. By visiting and using this website, you consent to the practices mentioned in ...Pricing Policy
All Pricing is determined by the qualification of the customer as per below. Stocking Dealer Policy Who is a Stocking Dealer? A Brick & Mortar Retail Store open to the public. Designer Wholesale Policy Who is a Designer? Independent Designer Interior ...
Related Articles
Leather Bed
Product Information & Assembly Instruction Features Our leather bed collection is lavishly upholstered in top grain leather. Premium Leather Upholstery Crafted from high-quality leather for a luxurious look and feel, offering durability and easy ...Metal Beds
Sizes Metal Beds Queen Queen – 62″ W x 87″ L Headboard Height: 57″ & Footboard Height: 47″ Interior Dimensions for Mattress: 60″ W x 80″ L King King – 78″ W x 87″ L Headboard Height: 57″ & Footboard Height: 47″ Interior Dimensions for Mattress: 76″ W ...Matelasses, Bed Throws & Bed Blankets
Sizes Bed Throw Queen 94″ W x 96″ L King 110″ W x 96″ L Blankets Queen 94″ W x 96″ L King 110″ W x 96″ L Bed Throw Shams Euro Sham 26″ W x 26″ L Throw Deco Pillow 14″ W x 40″ L Throw Deco Pillow 14″ W x 26″ L Deco Pillow Lumber 16″ W x 40″ L King ...Bed Skirts, Drapes & Decorative Pillows
Sizes Bed Skirts Queen 60″ W x 80″ L + 21″ King 78″ W x 80″ L + 21″ Drapes Custom 50″ W x 84″ L In-Stock 50″ W x 96″ L In-Stock 42″ W x 108″ L Custom 50″ W x 108″ L Custom 50″ W x 120″ L Decorative Pillows Deco Pillow 12″ W x 22″ L Deco Pillow 14″ W ...Duvet Covers
Sizes Duvet Covers Twin 70″ W x 92″ L Queen 90″ W x 92″ L King 106″ W x 92″ L Duvet Covers Shams Standard Sham 20″ W x 26″ L King Sham 20″ W x 36″ L Euro Sham 26″ W x 26″ L Wash Care Use a mild detergent and avoid detergents that contain bleach, ...